How to Replace a Kia Sportage Replacement Key
For a number of Kia models the key comes with a keyless entry system built-in. The key functions like a remote control, and can be exchanged with a Kia dealer.
Key fobs may stop working due to a variety of reasons, including a dead coin battery worn buttons signals, signal interference, water damage and a damaged receiver module. Here are some helpful tips to assist you in getting your Kia key fob that is a replacement for the sportage again.
How to replace the remote key or smart key?
The battery in your Kia's intelligent key will eventually need to be replaced, regardless of whether it is a remote key, a push-to-start key or a regular key that does not contain a transponder. This is particularly when the car displays a message telling that the smart or remote key is not powered by the battery.
Fortunately, it's a relatively simple process. In order to replace the battery on the key fob take out the mechanical key from the hole in the back of the key fob. Then break the cover. Inside the key fob, there will be a small screw that holds the battery in place. With a small screwdriver, loosen the screw and pull out the old battery. Install the new battery and then close the gap on the key fob.
When the key fob is equipped with an updated battery check it by pressing the locks and unlock buttons. If the doors lock and unlock according to your expectations, then you're in good shape! You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers become cold or you need to go on errands around Brandon.
Note: Some key fobs may need to be programmed (transponder chips or smart keys). This requires a programming machine which is available to the locksmith who works for the automotive dealer. Other keys (non transponder keys made of metal) do not require programming. If your key needs to be reprogrammed, then you must be aware of the key code written on the tag of the key code and save it in a safe location.
How do you replace the battery?
If the Kia key fob doesn't respond to pressing the lock or unlock button, it's a sign that the battery is depleted. A low battery could cause other issues such as the check engine light turning on or a delay in cranking the engine. It is fairly easy to replace the key fob batteries using just a few simple tools.
Before you begin the process, make sure that your vehicle is off and that all doors are closed. Find the small metal or plastic piece that is on the bottom of your key fob, and gently jiggle it until the metal key is released. Then, you can insert the key in the handle on the door of your driver to open your car.
To replace the key fob battery, remove the rear cover and use a plastic bar tool to loosen the latch that holds the black negative battery cable. Remove the old battery and align the new one to ensure that the "+" positive side is facing you, and the "-" negative side is facing the fob's electrical contacts made of metal. Avoid using too much force when pushing the new CR2032 into place to avoid damaging or breaking the metal contacts.
After you have installed the new battery, turn the key fob on and off in the ignition until the door locks cycle. You can then test your Kia's key fob again to confirm that it's working properly.
How do you replace a smart key
Depending on the model of the Kia Sportage, you may have a standard key fob or a smart key. The difference between the two is that the smart fob has a small mechanical key blade that is hidden inside, while the standard fob isn't equipped with. replacement kia keys www.g28carkeys.co.uk of key fobs are equipped with batteries inside that eventually will need to be replaced. This is a simple procedure that takes only two minutes.
Before you get started it is important to ensure that you are on a level surface with enough lighting and that your Kia is not on. Remember that the fob can contain small pieces that could fall if you're not careful.
The first step is to locate the small release button that is located on the lower backside of your fob. It will be a circular or rectangular slot. When you press it mechanical key blade, it will be released and you will be able to open the key fob.
Once you have the key fob open it is easy to remove the old battery and replace it. The new battery is a CR-2032 that can be bought online or from your local auto parts store. Once you're done it should be possible to lock, unlock and start your car with your key fob even if your engine isn't running!
How do you replace a mechanical key
The Kia key fob is a great convenience that lets us lock and unlock our car at the press of the button. Like any other device like a key fob, the Kia may have issues. Luckily, there are methods to troubleshoot these issues and keep our key fobs in good working order for the long run.
A dead or low-quality battery is one of the most frequent problems. This could cause your device to stop working or work intermittently. If this is the case, try replacing the battery with a new one.
If this doesn't solve the issue, try using a standard flathead screwdriver and wedge it into the casing of the fob's plastic. Be careful not to damage internal components, or scratch the plastic. Once the battery is removed then replace it with a brand new one.
Once the new battery is in, close and open the doors with the mechanical key (every Kia fob comes with an emergency mechanical key that will fit in the slot). Test the key fob to confirm it's working properly. If the fob isn't functioning, contact a locksmith or dealer to solve the issue. To avoid lockouts in the future, ensure that you have an emergency key that can work on all door and trunk cylinders.